Coalescing Glass Fibre Filter Element (Silica - Up to 500ºC)
£91.20 (Inc. VAT at 20%)
Unit of Measure : Box of 10
Coalescing Glass Fibre Filter Element (Silica - Up to 500ºC) - 12-32-xx / Silica (High Temp - Up to 500ºC) / Grade 40CS est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Impossible de charger la disponibilité pour le Service de retrait
Applications de filtration
Si vous ne trouvez pas ce dont vous avez besoin, n'hésitez pas à nous le demander, nous pouvons produire des filtres selon les spécifications des clients.
Description
Description
Coalescing Aerosol Removal Applications:
C-Type and CS-Type elements are specifically designed for the removal of liquid aerosols from gases in both corrosive and non-corrosive applications. These elements also remove particulates with the same efficiency.
C-Type = PVDF Binder - Corrosive Applications - Brown in colour
CS-Type = Silica Binder - High Temperature - White in colour
Disposable Bonded Microfibre Filters
Headline disposable filter elements are manufactured from precise mixtures of borosilicate glass microfibres, to the very highest standards of quality control. These elements offer exceptional filtration efficiency at very low pressure drops and, being 90+% void volume, give very long service life.
The elements are self-gasketing and easily sealed into the housing by axial compression. The elements are bonded to impart high strength and eliminate fibre shedding. The choice between the different binders available will depend upon the application conditions.
Filter Element Efficiency
Each element type is available in a wide range of grades of efficiency, covering the complete range from coarse bulk contamination removal (grade 80) and the essentially complete removal of submicron particles (grade 40).
Grade designations, removal of 0.1 micron particles
99.9999+% = Grade 40
99.99+% = Grade 50
99.5%+ = Grade 60
95+% = Grade 70
75+% = Grade 80
Filter Element Dimensions
All disposable filter elements have a part number arranged with three figures, e.g. 25-64-70. The first part refers to the inside diameter of the element in millimetres, the second figure refers to the overall length of the element in millimetres and the third part refers to the grade designation. Replace the ‘xx’ in the part numbers with the grade designation.
Paiement et sécurité
Méthodes de payement
Vos informations de paiement sont traitées de manière sécurisée. Nous ne stockons pas les détails de votre carte de crédit et n'avons pas accès aux informations de votre carte de crédit.